How To Dye Converse (4-Individual Methods)

Converse sneakers are stylish to wear and are currently a popular fashion trend. They come in a variety of stylish brands, sizes, and colors.

You might not be able to find your preferred color in every store, and wishes you knew how to dye converse so you can have your desired color.

You could just wish to restore your worn-out Converse sneakers; however, you would have to color your Converse shoes regardless of your choice, though.

Therefore the tips I will be sharing will be useful for you.

Converse sneakers are very popular and for a good reason. They look good with almost everything and are comfy to wear.

The best part is that they can be simply customized and used as a blank canvas by any artist.

How To Dye Converse

There are several ways you can dye your converse into your desired color, and some of those methods can be done at home. So below are DIY methods you can consider:

DIY Method 1: Use Markers

You can use markers to color your converse to your preferred color. Here are some steps to follow:

Step 1: Clean your shoe

New Converse is the greatest to work on. The ink will adhere and appear more clearly as a result.

However, you can always use the one you already have once it is properly cleaned. With a moist towel, clean the fabric components. Dry the shoe before continuing.

Step 2: Get some permanent markers

Permanent markers are commonly used on surface converses and they work well.

Step 3: Create a design, then test it out on a piece of paper

If you want to avoid making mistakes, you should sketch your design somewhere first.

Step 4: Beginning with the lightest hues and move on to the darkest

Avoid beginning with darker hues. Ink will smear and mix into lighter colors if you do, muddying them.

Step 5: Let it dry

Dry the converse for as long as needed. A few hours should be enough depending on the layers of ink you put in.

DIY Method 2: Using Paint

You can use paints to color your converse to your preferred color. Here are some steps to follow:

Step 1: Remove the shoelaces, then place masking tape over the rubber components

Only the fabric portions of your converse will be affected by this procedure. Acrylic and fabric paints don’t attach to rubber very well.

Step 2: Using a pencil, draw your design on the shoe

Only lightly press to prevent the pencil from showing through once the paint has dried. Use a white color pencil if your shoe is a particularly dark color instead.

Step 3: Create a design and test it out on scrap paper or fabric

Sketch out your design on a piece of paper. Using acrylic or fabric paint and several thin paintbrushes, color it in.

Step 4: Choose your paint

If you’re using acrylic paint, fill in your design with paint primer. Your colors will appear better and last longer as a result of this.

Step 5: Let the paint dry

Before proceeding to the following step, allow it to dry properly.

Step 6: Beginning with the larger forms

Fill in the shape after painting the shape’s edges. Wait until one layer is dry if you wish to add any details.

Remember that some hues, like yellow, require multiple coats to develop fully.

DIY Method 3: Using a dye

You can use dye to color your converse to your preferred color. Here are some steps to follow:

Step 1: Pick a shoe that is white or cream in hue

The color is transparent. Whatever color is already present is enhanced by it.

For instance, you would get purple if you attempted to color a pair of blue shoes red or pink. Additionally, you cannot dye shoes a lighter shade.

Step 2: Take off the shoelaces and apply masking tape on the rubber toe and soles

By doing this, the rubber will be kept from absorbing the dye.

Step 3: Prepare a salt and soap solution

One cup (225 grams) of salt and one tablespoon (15 milliliters) of washing detergent should be added to a large bucket of hot water.

The salt and detergent will aid in making the color more vibrant.

Step 4: Prepare your dye before adding it to the bucket

So make sure to pay attention to the instructions on your bottle or packet since each business may vary a little. Liquid dyes often don’t require any kind of preparation.

You must first dissolve any powdered color in 2 cups (475 milliliters) of boiling water if you’re using it.

Step 5: Dunk the Shoes in the Bucket

You must weigh down your shoes with something substantial if they begin to float to the top. You can use sticks, glass jars, bottles, or both.

Step 6: Remove the shoe

After 20 minutes, remove the shoes from the dye bath. The dye will have enough time to sink into the fabric as a result.

Step 7: Let the shoe dry

The shoes should be let to dry overnight on some newspaper. Set them out in a sunny area if you can.

This will hasten the drying process. You can substitute an old towel or even a paper bag if you don’t have any newspaper.

DIY Method 4: Alternative marker method

Here is another method you can use to color your converse to your preferred color. Here are some steps to follow:

Step 1: Choose your converse

Choose the show you want to decorate a pair of canvas shoes that are white or off-white.

Step 2: Clean your shoe

Always clean your shoe before you start any painting procedures.

Step 3: Select your desired color

Gather the supplies you will need.

Step 4: Layout your design

Prior to beginning to color, you can lay out your design with a pencil and make numerous revisions.

Step 4: Color your converse

Use the marker to trace the designated areas till you get a satisfying result.

Step 5: Rub alcohol on it

Following coloring, rubbing alcohol can produce a smeared appearance.

Step 6: Let it dry

Place the shoe in a ventilated area and let it air dry for about 20 minutes.

DIY Method 5: Painting with a marker to create doodles

Here is another method you can use to color your converse and create a beautiful design. Here are some steps to follow:

Step 1: Select the colors needed

Decide on the colors you want to use and prepare them accordingly.

Step 2: Decide on the drawings or doodles you want to create

Have the design stretched somewhere on a piece of paper so you can have a clear focus on what you want to create.

Step 3: Start coloring

Start with using lighter-colored markers. You may easily cover up any errors in this way. Deeper hues can be used for more richness. With use, colors will naturally fade.

Step 4: Spray alcohol on it

Use a paintbrush, spray bottle, or dropper to apply alcohol evenly to the areas of the shoe you want to smudge.

Step 5: Dry the shoe properly

Place the shoes in a dry location, away from anything that could spill on them.

Crucial FAQs

How do you permanently dye shoes?

You should wet the shoes before adding them to the dye bath. Leave shoes in a dye bath for a solid dye for 10 minutes to an hour.

Since nylon dyes are significantly darker and more quickly than other fibers, less actual time in the dye bath is required.

Remove the shoe from the dye bath once desired color is reached.

What paint to use on Converse for dyeing?

Using acrylic or fabric paint

Can I dye my shoes with fabric dye?

Sure. I advise International Fabric Shoe Color if you plan to dye your shoes yourself because it constantly yields top-notch results.

How long does it take to dye Converse?

After 20 minutes, remove the shoes from the dye bath. The dye will have had enough time to sink into the fabric as a result.

Can you dye Converse with paint?

Yes. Paints can be used to color the fabric components. Markers can be used to color the rubber components.

What paint will stay on the shoes?

There are acrylic paints made specifically to stick to leather goods, including shoes.

These paints are applied using a brush for a smooth and long-lasting finish. The alternative is to use spray paint, which you can buy online or at a hardware shop.

Can I dye shoes myself?

Yes. With the tips provided above, you can dye your converse to whatever color you want at home.

Final Words

It is normal to get tired of a particular color and wishes to change your converse to a preferred color.

Worn-out shoes can also be colored to give them a new face and maybe increase their longevity.

Dyeing your converse is something you can do yourself, and I have laid out many methods you can use to achieve that in the comfort of your home.

Whenever you want to use paint or dye to color your shoes, make sure to put on a rubber glove to prevent stains on your hands.

You can also use a noise mask if paint or dye has an unpleasant or strong odor.

With the information provided, go ahead and select the color of your choice and give your converse a fresh start.

Leave a Comment